¶ Endless soldering workshop
On 27.12. it's finally time for Congress again. At the 38th Chaos Communication Congress in Hamburg, we will be setting up our Soldering Assambly together with the Binary Kitchen again this year. In our Assambly you can solder non-stop on over 23 different kits on all 4 days. There will be 40 soldering stations, an area to decorate your kits, a 3D printer and of course detailed step-by-step instructions in German and English. There is also a hardware exchange with everything your heart desires. Do you still have usable chips, LEDs or other hardware? Come along and we're sure to find a place for them.
¶ Key facts
- Date and tome: You can solder around the clock!
- Subject: Over 23 differnet soldering kist, a 3D printer and a Hardware Exchange Area
- Open for own projects?: Yes! Bring your own project and solder with us
- Location: We link as soon as known
- Costs: Free - you are welcome to contribute to our coffee fund
¶ Whatsets we have?
All the sets can be found here Github
¶ ATX Breakout Board
Handy Breakout Board to get all the important voltages from a standard ATX power supply.
- Difficulty: 4/5
¶ Al Hacka Alpakca
Easy soldering kit in homage to Jugend hackt and its mascot.
¶ Arrow SMD
Small soldering kit with an arrow on it from https://wiki.blinkenarea.org/index.php/AntiKippenLights-Mini.
- Difficulty: 4/5
¶ Axolotl Badge
Easy RGB soldering kit with the best Axolotl!
- Difficulty: 2/5
¶ Cat in a Box 1
A Cat in a box easy SMD kit. Bright glowing LED-eyes are watching every step! With this soldering kit it is super easy to learn SMD soldering.
- Difficulty: 3/5
¶ Cat In A Box
Can you please turn around? If you stare, the cat will stare back in all colours of the rainbow due to RGB-LEDs on the back. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Cube DIP
Simple LED cube consisting of 27 RGB LEDs in a 3x3x3 configuration. No programming needed.
- Difficulty: 3/5
¶ Daisy RGB
This 3D construction kit allows you to solder a personalized daisy with a large RGB LED in the center, with colors adjustable using variable resistors and overall brightness and individual colors adjustable via slide switches.
- Difficulty: 2/5
¶ Dice DIP
Electronic dice which uses button bouncing and timing for randomness.
- Difficulty: 3/5
¶ Dice Micro Controller DIP
Dice with micro controller. Electronic dice which uses C random generator.
- Difficulty: 2/5
¶ Dino
This rainbow dinosaur will brighten up your life. The spikes are glowing in all colours of the rainbow due to RGB-LEDs on the back. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Heart DIP
Small soldering kit with an heart on from https://wiki.blinkenarea.org/index.php/AntiKippenLights-Atmel
- Difficulty: 2/5
¶ Heart SMD
Small soldering kit with an heart on it from http://wiki.blinkenarea.org/index.php/AKL-Mini
- Difficulty: 4/5
¶ Humo - Solder-Fume Exctractor
This simple solder fume extractor just needs a PC fan and a solder fume filter. If you add some goggly eyes the fume extractor has a pretty nice smiling face. It is optimised for laser cut parts.
- Difficulty: 2/5
¶ I Can Solder DIP
Very easy soldering kit with three LEDs. Can be used as pin button.
- Difficulty: 1/5
¶ Katie The Cat
A wonderful and easy soldering Kit with two different eye-colours.
- Difficulty: 2/5
¶ Kitchen Head SMD
Small soldering kit using SMD components with the kitchen head on it.
- Difficulty: 4/5
¶ Moon Cat
Excuse me? What are you staring at? This wonderful kit is very simple in terms of circuitry, but the result is simply hilarious.
- Difficulty: 2/5
¶ NE555 Heart THT
A wonderful Heart with SMD LEDs. You can choose between full on, follow-LEDs and even can influence the speed of your LEDs.
- Difficulty: 3/5
¶ NE555 Heart SMD
A wonderful Heart with SMD LEDs. You can choose between full on, follow-LEDs and even can influence the speed of your LEDs.
- Difficulty: 4/5
¶ Nibble++
A simple PCB to test your SMD hand-soldering skills. Going down to sand grain sized 01005 SMD parts, this button is a challenge for experienced "soldiers" and those who want to become one.
- Difficulty: 6/5
¶ Nibble Peg DIP
¶ Nibble Peg DIP
Very easy soldering Kit using simple Tools and nearly no soldering knowledge is needed.
- Difficulty: 1/5
¶ Nibble Peg DIP with On/Off Switch
Easy soldering Kit using simple Tools and nearly no soldering knowledge is needed.
- Difficulty: 2/5
¶ Owl Thief THT
A simple joule thief circuit on the back of an owl. If you solder everything right, you can empty old batteries and make the eyes glow orange.
- Difficulty: 2/5
¶ Push-It DIP
Simon Says clone with (optional) multiplayer mode
- Difficulty: 2/5
¶ Rainbow Butterfly
A wonderful rainbow Butterfly. The wings are enlighted by RGB-LEDs from the back of the PCB. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Rainbow Unicorn 1
This unicorn will brighten up your life. The hair is glowing in all colours of the rainbow due to RGB-LEDs on the back. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Ring Light SMD
A simple SMD learning kit where a light chases around a circle.
- Difficulty: 4/5
¶ Robo Robin
Light up this super easy Robot. It has RGB-LEDs as eyees.
- Difficulty: 1/5
¶ Rainbow Rocket
Fly to the moon with this RGB rocket badge.
- Difficulty: 2/5
¶ Saw-Tooth Organ DIP
Some Transistors creating a saw tooth wave enabling a very simple organ which you can play like a piano with a stylus.
- Difficulty: 2/5
¶ WeevilEye
The kit is a very easy kit with push-through parts, which is explicitly aimed at beginners. Once assembled, the red LED “eyes” light up brighter or dimmer depending on how much light falls on the photo sensor.
- Difficulty: 2/5
¶ Want to contribute?
Nice!
During the congress, we want to show others how to solder and be available for questions and problems.
Everyone can help. On site, we will organize introductory sessions for all (new) helpers to familiarize them with our equipment.
We have a signal group that serves as a short line for coordination.
Join chat: click here