Am 27.12. ist es endlich wieder soweit, endlich wieder Congress.
Auf dem 38. Chaos Communication Congress in Hamburg werden wir dieses Jahr wieder zusammen mit der Binary Kitchen unsere Zelte aufschlagen.
Bei uns in der Assambly könnt ihr an allen 4 Tagen nonstop an über 23 verschiedenen Bausätzen löten.
Dafür stehen euch 40 Lötstationen, ein Bereich zum Dekorieren eurer Sets, ein 3D Drucker und natürlich ausführliche Schritt-für-Schritt Anleitungen in Deutsch und Englisch zur Verfügung.
Außerdem gibt es eine Hardware-Tauschbörse mit allem, was das Herz begehrt. Ihr habt noch brauchbare Chips, LEDs oder andere Hardware? Kommt vorbei und wir finden bestimmt einen Platz dafür.
¶ Die Fakten
- Datum und Uhrzeit: Löten kannst du bei uns rund um die Uhr!
- Was: Über 23 unterschiedliche Bausätze, einen 3D Drucker und eine Hardware-Tauschbörse
- Offen für eigene Projekte: Ja! Bring dein Projekt mit und löte bei uns
- Ort: Wir verlinken sobald bekant
- Kosten: kostenlos, du kannst gerne was in unsere Kaffeekasse geben
¶ Welche Sets haben wir?
Alle Sets sind auf GitHub
¶ ATX Breakout Board
Handy Breakout Board to get all the important voltages from a standard ATX power supply.
- Difficulty: 4/5
¶ Al Hacka Alpakca
Easy soldering kit in homage to Jugend hackt and its mascot.
¶ Arrow SMD
Small soldering kit with an arrow on it from https://wiki.blinkenarea.org/index.php/AntiKippenLights-Mini.
- Difficulty: 4/5
¶ Axolotl Badge
Easy RGB soldering kit with the best Axolotl!
- Difficulty: 2/5
¶ Cat in a Box 1
A Cat in a box easy SMD kit. Bright glowing LED-eyes are watching every step! With this soldering kit it is super easy to learn SMD soldering.
- Difficulty: 3/5
¶ Cat In A Box
Can you please turn around? If you stare, the cat will stare back in all colours of the rainbow due to RGB-LEDs on the back. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Cube DIP
Simple LED cube consisting of 27 RGB LEDs in a 3x3x3 configuration. No programming needed.
- Difficulty: 3/5
¶ Daisy RGB
This 3D construction kit allows you to solder a personalized daisy with a large RGB LED in the center, with colors adjustable using variable resistors and overall brightness and individual colors adjustable via slide switches.
- Difficulty: 2/5
¶ Dice DIP
Electronic dice which uses button bouncing and timing for randomness.
- Difficulty: 3/5
¶ Dice Micro Controller DIP
Dice with micro controller. Electronic dice which uses C random generator.
- Difficulty: 2/5
¶ Dino
This rainbow dinosaur will brighten up your life. The spikes are glowing in all colours of the rainbow due to RGB-LEDs on the back. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Heart DIP
Small soldering kit with an heart on from https://wiki.blinkenarea.org/index.php/AntiKippenLights-Atmel
- Difficulty: 2/5
¶ Heart SMD
Small soldering kit with an heart on it from http://wiki.blinkenarea.org/index.php/AKL-Mini
- Difficulty: 4/5
¶ Humo - Solder-Fume Exctractor
This simple solder fume extractor just needs a PC fan and a solder fume filter. If you add some goggly eyes the fume extractor has a pretty nice smiling face. It is optimised for laser cut parts.
- Difficulty: 2/5
¶ I Can Solder DIP
Very easy soldering kit with three LEDs. Can be used as pin button.
- Difficulty: 1/5
¶ Katie The Cat
A wonderful and easy soldering Kit with two different eye-colours.
- Difficulty: 2/5
¶ Kitchen Head SMD
Small soldering kit using SMD components with the kitchen head on it.
- Difficulty: 4/5
¶ Moon Cat
Excuse me? What are you staring at? This wonderful kit is very simple in terms of circuitry, but the result is simply hilarious.
- Difficulty: 2/5
¶ NE555 Heart THT
A wonderful Heart with SMD LEDs. You can choose between full on, follow-LEDs and even can influence the speed of your LEDs.
- Difficulty: 3/5
¶ NE555 Heart SMD
A wonderful Heart with SMD LEDs. You can choose between full on, follow-LEDs and even can influence the speed of your LEDs.
- Difficulty: 4/5
¶ Nibble++
A simple PCB to test your SMD hand-soldering skills. Going down to sand grain sized 01005 SMD parts, this button is a challenge for experienced "soldiers" and those who want to become one.
- Difficulty: 6/5
¶ Nibble Peg DIP
¶ Nibble Peg DIP
Very easy soldering Kit using simple Tools and nearly no soldering knowledge is needed.
- Difficulty: 1/5
¶ Nibble Peg DIP with On/Off Switch
Easy soldering Kit using simple Tools and nearly no soldering knowledge is needed.
- Difficulty: 2/5
¶ Owl Thief THT
A simple joule thief circuit on the back of an owl. If you solder everything right, you can empty old batteries and make the eyes glow orange.
- Difficulty: 2/5
¶ Push-It DIP
Simon Says clone with (optional) multiplayer mode
- Difficulty: 2/5
¶ Rainbow Butterfly
A wonderful rainbow Butterfly. The wings are enlighted by RGB-LEDs from the back of the PCB. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Rainbow Unicorn 1
This unicorn will brighten up your life. The hair is glowing in all colours of the rainbow due to RGB-LEDs on the back. The soldering kit is very simple and easy to assemble.
- Difficulty: 2/5
¶ Ring Light SMD
A simple SMD learning kit where a light chases around a circle.
- Difficulty: 4/5
¶ Robo Robin
Light up this super easy Robot. It has RGB-LEDs as eyees.
- Difficulty: 1/5
¶ Rainbow Rocket
Fly to the moon with this RGB rocket badge.
- Difficulty: 2/5
¶ Saw-Tooth Organ DIP
Some Transistors creating a saw tooth wave enabling a very simple organ which you can play like a piano with a stylus.
- Difficulty: 2/5
¶ WeevilEye
The kit is a very easy kit with push-through parts, which is explicitly aimed at beginners. Once assembled, the red LED “eyes” light up brighter or dimmer depending on how much light falls on the photo sensor.
- Difficulty: 2/5
¶ Du möchtest mithelfen?
Nice!
Während dem Congress wollen wir anderen zeigen, wie man lötet und für Fragen und Probleme zur Verfügung stehen.
Mithelfen können alle. Vor Ort organisieren wir für alle (neuen) Helfenden Einführungsrunden, um sich mit unserer Ausrüstung vertraut zu machen.
Zur Koordination und Absprache haben wir eine Signalgruppe, die als kurzer Draht dient.
Chat beitreten: Link anklicken